img
206-06a
Hydraulic Brake Actuation -- Load Proportioning Valve (1 tonne option)
206-06a
SECTION : 206-06A Hydraulic Brake Actuation --
Load Proportioning Valve (1 tonne option)
VEHICLE APPLICATION : 2006.0 BF Falcon
CONTENTS
PAGE
DESCRIPTION AND OPERATION
Hydraulic Brake Actuation -- Load Proportioning Valve .....................................................206-06A-1
REMOVAL AND INSTALLATION
Load Proportioning Valve ....................................................................................................206-06A-2
01/2006 2006.0 BF Falcon
img
206-06a-1
Hydraulic Brake Actuation - Load Proportioning Valve (1 tonne option)
206-06a-1
DESCRIPTION AND OPERATION
Hydraulic Brake Actuation - Load
Proportioning Valve
Refer to Section 206-00.
BF00001 en
01/2006 2006.0 BF Falcon
img
206-06a-2
Hydraulic Brake Actuation - Load Proportioning Valve (1 tonne option)
206-06a-2
REMOVAL AND INSTALLATION
Installation
Load Proportioning Valve
1. Installation is the reverse of the removal
Removal
procedure. Once installed, bleed the brake
The Load Proportioning Valve is located on the
system. Refer to Hydraulic System Bleeding in
chassis rail above the rear axle.
Section 206-00.
NOTE: The load proportioning valve is a
non-serviceable component and must be replaced
if faulty.
1. Remove all the brake tubes from the load
proportioning valve.
2. Loosen the strap attaching the nut.
3. Support the strap and remove any force from the
bracket, remove strap attaching nut.
4. Release strap support and remove load
proportioning valve fastening nuts.
5. Remove assembly.
BF00002 en
01/2006 2006.0 BF Falcon